Rolling benches

So four hours later, the frame has retractable casters. Essentially, there are a set of rails



inset inside the legs (from 2 x 4s) and a pair of 2 x 4 hinged with two 2 1/2 swivel casters. The picture on top is the caster plate folded under the frame, lifting the bench about 3/4 inches off the floor. All held together and to the legs with lag bolts. To engage/disengage the caster, lift up an end and grab or kick the casters with your foot. Lower tech than the table saw base. But it works well.




Next, gluing up the top. But first, need a cutting guide for the circular saw. Meta projects.